Sirona inEos Blue, Operating Instructions Manual, Page: 20 / 52

63 33 632 D3446
20 D3446
.
201.02.03
.
23 07.2011
6 Initial installation of the software Sirona Dental Systems GmbH
6.3 Switching the unit on and starting the software Operating Instructions Sirona Dental CAD/CAM System
6.3 Switching the unit on and starting the software
Switching the unit on and starting the software Let unit dry off after storage
1. Switch the unit on at the main switch.
2. Start the software at the PC via the Windows start menu.
6.4
Selecting the 3D acquisition system
Selecting the 3D acquisition system
1. Click
"Settings"/"Configuration"/"Acquisition system" in the user
software.
ª
The menu for selection of the 3D acquisition system opens.
2. Select
"inEos".
3. Click the "OK" button.
NOTICE
Do not put the unit into operation at low temperatures!
If you move the unit to the operating site from a cold environment,
condensation may form and result in a short circuit.
✔
Install the unit at room temperature.
➢ Wait until the unit has reached room temperature and is absolutely
dry.
ª
The unit is dry and can be put into operation.