14
Place the front row of 5 coals/pebbles between the front coal support and the rear matrix as
shown.
Now Place the second row as shown below, coals may be rotated slightly within their positions
to give a good visual effect.
Note: Please ensure that there is a gap
between the back of the front matrix
and the pilot assembly where
applicable, this is to ensure correct
operating of the pilot and O.D.S system,
this must not be touching the assembly
as this will cause the fire to operate
incorrectly and cause damage to the
fire and to malfunction.
BURNER
FRONT MATRIX
PILOT ASSEMBLY
