30
CLEANING
Before carrying out any of the following operations, ensure that the fire is OFF and completely cold.
Debris that may form on the fire bed should be periodically removed by a competent person.
Large deposits could indicate deterioration of the flue. This should be repaired by a competent person, and
the fire serviced before further use.
FIRE FRONT/FRET - Any dust accumulating in the fire front may be removed using a vacuum cleaner or dry
cloth. Heavy stains may be removed by using a damp cloth and mild household detergent.
Brass parts of the fire front may be cleaned using a suitable brass cleaner.
Replace the front centrally against the fire after cleaning.
PAINTED AREAS - These can be cleaned using a dry cloth.
COALS AND CERAMICS
See the relevant section in the Installation Guide of these instructions.
SERVICING
The fire and flue should be checked on an annual basis to ensure all of the products of combustion are
entering the flue and that there is no excessive build up of soot.
The frequency of service will depend on usage, but
MUST
be carried out at least once annually.
Servicing must be carried out by a competent person, such as a Gas Safe registered installer.
Cleaning of the coals may be carried out by following the instructions given in the Installation section.
The Installation instructions carry full servicing details for the use of the installer.
If debris from the flue or other foreign matter is found on the fire it may indicate a need for servicing.
Do not use the fire until the source of the debris has been found and rectified.
Air vents (where fitted) should be checked periodically to ensure they are free from obstruction.
