87
Tour with Vehicle Kit User Guide
10.
If you selected No DHCP, enter the IP Addresses . Note that until all the required IP addresses
have been properly entered, you will be unable to proceed .
a.
Enter the Radio IP Address (the IP address that will be assigned to Tour) .
b.
Tap the box and enter the Network Mask .
c.
Tap the box and enter the Gateway Address .
d.
Tap the box and enter the DNS Address . If all IP addresses have been entered correctly, the
Go button will become enabled . Tap the
Go
button .
11.
At the Confirm Settings screen, confirm that all the information that you entered is correct . If
not, tap the
Reconfigure
button . If correct tap the
OK
button .
System Settings
