2.1.1. Front metal cover
(position 1)
-
Metal cover made of aluminium sheet, thickness 2 mm with powder paint against corrosion. Standard
version in two shades RAL 9003 (white), RAL 7016 (anthracite)
2.1.2. Installation template
(position2)
- aluminium sheet construction, thickness 2 mm treated with powder paint against corrosion. Standard
version in two shades RAL 9003 (white), RAL 7016 (anthracite). The colour of the front metal cover and
installation template is always the same. Cannot be combined.
2.1.3. Mounting pins
(position3)
- The pins are made of steel logs
Ø
9 mm featuring anti-corrosion galvanising. The M6 inner thread is located
on one side of the pin. On the other side, the pin has an external M6 thread where the surfaces are
created for tightening the pin into the installation template.
2.1.4. Unit body – fitting
(position4)
- The body of the unit is made of black pressed EPP plastic (expanded polypropylene). It ensures the accuracy
and repeatability of the installation of components. The material itself is an advanced technical material
with a unique combination of properties, such as strength at low weight, rebound elasticity, thermal
insulation, chemical resistance, sound insulation, and recyclability.
2.1.5. Unit cover
(position5)
-
The unit cover is made of black pressed EPP plastic (expanded polypropylene). It ensures the accuracy
and repeatability of the installation of components. The material itself is an advanced technical material
with a unique combination of properties, such as strength at low weight, rebound elasticity, thermal
insulation, chemical resistance, sound insulation, and recyclability.
2.1.6. Reinforcement
(position 6)
-
Metal reinforcements are made of a 2 mm thick steel sheet with anti-corrosion powder paint RAL 9005.
2.1.7. Bolt M6x30
(position 7)
-
Galvanised M6x30 hex head bolt.
20
21
22
18
19
Fig. 3
11
Version 1 – GBR(23/06/2021)
D-502-0152
