5.4.3. Description of the ventilation power setting range
-
Setting the correct performance of the unit
4.
Ventilation Power Settings
1. In regular mode, double-click on button 1 or 2 or 3 to enter the settings mode – LED 10 flashes (fan
pictogram).
2. As long as LED 10 flashes (approx. 4 sec), set the required degree of ventilation according to Table
19 or according to your request with buttons 1 or 3:
o
if you did not manage to complete the settings (LED 10 stopped flashing), repeat the procedure.
3. After setting the request, the newly set value is automatically saved (approx. within 4 sec) and the
controller switches to the regular mode.
5.4.5. Temperature Setting Range – only in the electric version (XR1-xxx-ECE1...)
The assignment of LEDs to the individual temperatures is only indicative. They cannot under any circumstances be
regarded as binding.
6.
Setting the Required Temperature:
1. In regular mode, double-click on button 1 or 2 or 3 to enter the settings mode – LED 10 flashes (fan
pictogram).
2. As long as the LED 10 flashes (approx. 4 sec), click button 2 once – LED 7 will start starts (the
thermometer pictogram).
3. As long as LED 7 flashes (approx. 4 sec), set the required temperature in the space according to Table
20 or according to your request using buttons 1 or 3:
o
if you did not manage to complete the settings (LED 10 stopped flashing), repeat the procedure.
4. After setting the request, the newly set value is automatically saved (approx. within 4 sec) and the
controller switches to the regular mode.
5.4.7. Display of the Indicated Statuses on the Controller by LEDs
-
The LED indication on the controller is the same for all the unit types, except for the absence of a range
of temperature settings (position 8; 9) for the type with a water exchanger and cold design.
Tab 19
Tab. 20
Tab 18
41
Version 1 – GBR(23/06/2021)
D-502-0152