SINO SDS6, Operation Manual

Page: 87 / 117

J. 200 Tool Storeroom(Be the same with: LATHE)
78
200 tool storeroom:
It will need to use different tools when turning different work pieces or
different surface of work pieces, so it is necessary to uninstall and adjust the tools,
SDS6 digital readout has the function of 200 tools storeroom, which makes the
operation simple.
Notice: The function of 200 tools storeroom can’t be used but the lathe has
the frame of adjusting tool. Please don’t use this function if you
haven’t the frame of adjusting tool.
1. Set a base tool. In the state of “ALE”,
to clear the display value of the X axis
or the Y
axis when moving the base
tool to touch the frame of adjusting tool.
2. Ensure the other tool position relative to
the base tool position, which is also the zero
point of “ALE” coordinate system, as the figure (a) shows, the relative position
of the second tool is:
X-axis 25-30=-5, Y-axis 20-10=10.
3. Number the tool, and store the relative position to the base tool into the
digital readout.
4. In process, the operator can input the numbers
of using tool, the digital readout will display
the relative position dimension of using tool
to the zero point of “ALE” coordinate system,
moving the lathe platform to make the
display of X axis and Y
axis become zero.
5. The tool storeroom can store datum of 200
tools.
6. If the function of 200 tools storeroom is opened, you can lock this function after
you continue to touch the key 10 times.
If the function of 200 tools is locked, you can unlock this function after you
continue touch the key 10 times. In the state of “ALE”.
Means close tool storeroom
；
Means open tool storeroom
。
±
±
Base Tool
Tool 2
Tool 1
(a)
10
3
0
25
20
Tool 1
Tool 2
Tool 2
10
5