SINO SDS6, Operation Manual

Page: 76 / 117

G. Angular Surface Processing(Be the same with: MIIL_MS)
67
Angular Surface Processing
When the processing of a rather large angular surface is one part of job, the
angular processing function can make the job much easier.
Ⅰ
. Aligning for the bank angle:
When the processing surface is Plane XY
as in the case of the fitting shown in Fig. (a),
it is necessary to align the working piece for
the bank angle before processing the angular
surface. In this case, the angular surface
processing function plays its role in aligning
the reference plane for the bank angle.
The procedure of aligning for the bank angle:
At first, set the working piece on the machine
table with an oblique angle equal roughly the
desired bank angle.
1. Key
，
to enter the angular surface
processing function.
2. Select the processing plane-Plane XY.
3. Enter the angle of the angular surface (ANGLE).
4. Move the machine table to let the metering tool(for example, dial indicator)
preset on the milling machine come just in contact with the reference plane
being aligned, adjust the scale reading into zero, and move the machine table an
arbitrary distance along X axis.
5. Key , refer to the display and move along Y axis until the displayed value
become zero.
6. Adjust the angle of the working piece and bring the scale reading into zero.
For example: Align the bank angle of the working piece to 45° as shown in
Fig. (b).
1) Set the working piece on the machine table with a bank
angle equal roughly 45°
Key
45
°
(a)
(b)