SINO SDS6, Operation Manual

Page: 16 / 117

A. Basic Function
7
6. key display
As shown in the figure, the enter
between two points is to be found.
1) Let the tool touch the one edges of the
working piece and Return the X-axis displayed Value to zero, then
move the tool
along the direction of arrow and let it come to touch the other edges of the
working piece, then do the next step can determine the center position.
2) Key axis key
3) Key
4) Move the machine tool to bring the
axis displayed value into zero, and
the center position is reached.
(in the same method can determine the center positions of Y-axis and Z-axis).
note: Lathe machine without this function.
7. “R/D” (Radius/Diameter) Switch Display.
X axis datum on the center line.
1) Cutting tool in place A.
2) Key
3) Move the cutting tool to place B.
4) Key
Notes: only lathe machine has this function
；
A lit “SEL” indicator means
diameter display, Y
、
Z axis is not able to display so.
8. The switch of the summing axis value displaying type.
1
2
1
2
SEL
SEL
SEL
144
6
SEL
SEL
SEL
SEL
B
A
φ
2
0
φ
1
0
1
2
1
2