SINO SDS6, Operation Manual

Page: 45 / 117

D. Hole Drilling Along An Oblique Line(Be the same with: MIIL_MS)
36
4) Enter the length of the oblique line
Key
Key
5) Enter the angle
Key
Key
6) Enter the number of holes
Key
Key
7) The position of the first hole is
displayed, enter processing state.
8) Key to display the position of next processing point, and then move the
machine tool to bring the displayed value on both X- and Y-axes into zero. You
can quit the function at will, just key .
For the working piece in (a), it is more convenient to select “MODE L”. In
the following, we take working piece in (b) as anther example to shown how to
operate when “MODE S” is selected.
1) At first move the tool to the position of the
start hole A.
Key to enter the function
2) Choosing the processing plan
Press or
Choose “processing plan”, press
（
only 3V readout has this set item
，
2V readout has only XY plane so needn’t
choose plane and can directly get into next step
）
3) Select Mode
Key or
Select “MODE S”
Key
6
0
0 3
4
SEL
SEL
SEL
SEL
SEL