L. (EDM) Matching Output Function(Be the same with:
3V-EDM)
86
4) X-axis will display “target value of personal location”
Y-axis will display “value of depth reached”. Note: Values on Y-axis means the
depths reached on the work piece by processing.
Z-axis will display “real time value of personal location”. Note: Values on
Z-axis mean the values of locations of main axis electrode on Z-axis.
5) Start processing. The displayed value on Z-axis gradually gets close to the
target value. The displayed value on Y-axis also gets close to the target value. If
the electrode is repeated raised and lowered at this time, the displayed value on
Z-axis will change accordingly. But the displayed value on Y-axis will not
change, and always refer to the value of depth reached by processing.
6) When the displayed value on Z-axis is equal to the set target value, the
matching switch is shut off, EDM discharging machine will stop processing,
and message screen will display “EDM. E”. According to the setup of operators,
there are 2 kinds of exit modes:
①
automatic mode: means automatically exit
from the processing status of spark machine, and return to the display status
before such processing;
②
pause mode: “EDM. E” is always displayed, you
have to press the button once to exit and return to the original display
status.
3. Set “ERRHIGH”, exit mode and processing direction:
Before processing, you can first set “ERRHIGH”, “exit mode” and
“processing direction”.
1) Enter “EDM”
Key
2) Enter Setup Mode
Key
SEL
SEL
SEL
SEL
SEL
SEL
Summary of Contents for SDS6
