Singer XL-420, Instruction Manual

Page: 82 / 124

80
(0%52,'(5<3$77(51,60,6$/,*1('
Embroidering is
continuing when
thread is tangled.
No stabilizer attached
when using light or
stretch fabric.
Attach stabilizer to
the fabric.
Refer to page 66 -
69.
Fabric is not tight
enough in the hoop.
Tighten the fabric in
the frames so that
when the fabric is
WDSSHGZLWKD¿QJHU
LWPDNHVDVRXQGOLNH
a drum.
Refer to page 64 -
65.
Embroidery hoop
is not correctly
attached.
Attach the hoop
securely to the hoop
EUDFNHWZLWKWKHKRRS
mounting screws.
Refer to page 70 -
71.
If the thread remains
tangled, the fabric
PD\SXFNHUDQG
UXLQWKH¿QLVKHG
embroidery. Stop
embroidering, remove
the hoop and untangle
the thread.
This can cause fabric
WRSXFNHUDQGUHVXOW
in uneven feeding,
reduce the thread
tension.
Refer to page 22 - 23.
1HHGOHWLSLVEURNHQ
RUQHHGOHLVWRRWKLFN
Select a correct
needle.
Refer to page 20 - 21.
If the thread is tangled
on the spool pin or
somewhere along the
thread path, this will cause
the thread to hang up and
not advance through the
machine. This will increase
the upper thread tension
and cause the fabric to
SXFNHU&KHFNWKHWKUHDG
Refer to page 16 - 19.
Thread is tangled
somewhere along the
thread path.
0$&+,1(6,'(
HOOP SIDE
Upper thread tension
is too tight.
Hoop is obstructed
against free motion.
&KHFN DURXQG WKH
h o o p a n d r e m o v e
things which cause
obstruction.