manualshive.com logo in svg

Sindoh A1SD Series, User Manual, Page: 35 / 142

Share
Download
Sindoh A1SD Series User Manual Download Page 35

1

-7

Preparation for Machine Operation

1

4.   Installation (Incl. Connection and  S/W  Installation)

 

Caution

  

-  Please remove all packaging materials from inside and outside of the device. Furthermore, open the

 

    orange cover and remove all protective materials and accessories from interior.

4.1  Device Connection

  

1

 

Connect the power cable to the power socket on the rear side of the device, and connect the power 

  

    cable to the power outlet.

  

2

 

Turn on the power switch on the back of the machine.

 

  

3

 

Press the power button, located on the lower right of the device.

  

4

 

Please set the language to be used according to instructions shown on UI.

  

5

 

Adjust the level of the device with enclosed spinner according to instructions shown on UI.

  

    (Refer to “Level Printer of 2. UI Menu Function”)

 

  

Summary of Contents for A1SD Series















































































































































Reviews:

No comments