Sindoh A1SD Series, User Manual

Page: 128 / 142

Maintenance
5
-12
5
2. Error Messages and Solutions
Message Description What To Do
Booting
Please wait until
booting is complete.
On the first boot, the user must
wait until the booting process is
finished.
Once the boot-up process is finished and the
machine is ready, this message disappears
automatically.
Error
EC 301
Error with the main cooling fan in
the rear.
Check if there is any foreign substance that
interferes with the fan operation, and remove it.
If the problem persists after rebooting, request.
Error
EC 304
Error on the cooling fans inside
the machine.
Reboot the machine. If the problem persists after
rebooting, request A/S.
Error
EC 312
During printing, a chamber
temperature higher than 40°C
has been detected for more than
10 times.
Reboot the machine. If the problem persists after
rebooting, request A/S.
Error
305,306,307
Error with the fan. Reboot the machine. If the problem persists after
rebooting, request A/S.
Error
EC 511, 512, 513,
516, 517
Problem with the platform
transport motor.
Check if there is any foreign substance that interferes
with the platform driving parts, and remove it.
Reboot the machine. If the problem persists after
rebooting, request A/S.
Notification 311 The target temperature is not
reached within 60 min of
operation.
Wait until the target temperature is reached, or
press [Start Now] to start printing.
If problem persists even though temperature of the
site satisfies the recommended temperature
condition(20
℃
~30
℃
), request A/S.