Sindoh A1SD Series, User Manual

Page: 20 / 142

Before Using the Machine
14
8. Notices
❖
Manufacturer
Sindoh Co., Ltd.
Address : 3, Seongsui-ro24-gil, Seongdong-gu, Seoul 04797, REPUBLIC OF KOREA
❖
Noise Emission Level
The following noise level is measured in accordance of ISO 7779 and reported to meet ISO 9296.
Some modes may not be available in products you purchased.
Average Sound Pressure at 1 Meter Away (dBA)
Printing 45dBA
Standby Under 40dBA
❖
Temperature/Humidity
Machine
Operation
20
℃
~30
℃
, 15%RH~70%RH
(If the temperature is over 30
℃
or the humidity is over 70%, we cannot guarantee the print
quality.
Even if the humidity rises excessively during printing, the print quality cannot be guaranteed.
Adjust the surrounding environment so that the humidity is less than 70% before printing. )
Shipping
-20
℃
~40
℃
, 15%RH~95%RH (for 0
℃
or lower, temperature should be higher than
the outdoor’s, must not touch the floor)
Storage -20
℃
~40
℃
, Below 80%RH (No condensation, must not touch the floor)
❖
Other conditions of use
- Indoor use, dry location
- Altitude : 2,000m or less
- Polution Degree
Dust : 0.1mg/m3 or less (average concentration for 8 hours)
- Rating : 100-240V~, 50/60Hz, 5.0A
Overvoltage Category II
❖
Disposal of the Products
Do not dispose the machine and consumables together with household wastes.
For disposal or recycling, contact your local sales office.
❖
EMI(Electromagnetic Interference) Notice
This machine complies with the limits for Class A.
Class (Industrial Device) : This is a class A Product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.
①
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.