Sindoh A1SD Series, User Manual

Page: 109 / 142

4
-3
Checking Printed Output
4
3 Platform Locking Screws Removal
If not removing the resin remnant sufficiently, the table, work area or machine exterior may become
contaminated by the overflowing resin from the platform when carrying the platform.
As shown in the picture below, please place the platform over a resin tank that resins accumulated
on the platform drop to the resin tank.
Please remove the remaining resin by scraping with the scrapper shipped with the machine.
Important
- Be careful not to drop or splash resin to other parts but resin tank. Move the metal scrapper slowly so
that resin falls into the resin tank at the edges of platform.
- Be careful not to damage the output on the platform during the operation.
Caution
- The blades and edge of the metal scraper are very sharp, so be careful not to injure yourself
when scraping the resin.
4 Detaching the printed output from platform
Remove the platform and move it to cleaning tray enclosed in finisher kit.
Tray