manualshive.com logo in svg

Sindoh A1SD Series, User Manual

Share
Download
Sindoh A1SD Series User Manual Download Page 22

Before Using the Machine

16

 

Note

  

-  You can set the time for machine to become power saving mode automatically.

 

    For more information, please refer to ‘Energy Saving’ in ‘2. UI Menu Function’.

❖

  Deactivated Mode

    The machine consumes power even in the deactivated mode. Unplug the power cord to completely 
    stop the power consumption.

❖

  Total Energy Usage

    It would be useful to calculate the Total energy usage of the machine.
    Since the electricity bill is charged in Watt unit, you have to multiply time spent in each mode by power    
    consumption in order to calculate the energy use.
    Total energy usage is the sum of energy used in each mode.

❖

 Condensation

    Dramatic change of the ambient temperature may produce water droplets on the interior and
    exterior of the machine. Wipe the water droplets on the outer surface, but for the inside please let them 
    dry off by leaving front door and cover opened. 

 

Note

  

-  Do not remove caution labels or notations.

 

    If you can’t make them legible, or if caution label or notation is damaged, please contact your service 

 

  representative.

Summary of Contents for A1SD Series















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands