Sindoh A1SD Series User Manual Download Page 24

Page: 24 / 142

Before Using the Machine

10. Wifi Module Disclaimer

❖

This machine includes a WIFI module compatible only with Sindoh’s 3D Printer models.

Whether the WIFI module is equipped or not can be differed by models.

Wifi Module Inside

Important

- This Wifi module can cause radio interference, therefore it should not be used for any purposes related to

human lives.

- Do not expose this product to water, humidity or liquid.

- Do not expose this product to direct light, hot temperature or fire.

Caution

- If the machine has been modified by unauthorized personnel, Sindoh is not liable for the machine

trouble or failure.

Caution

- To prevent RF signals that exceed FCC RF exposure limits from being exposed to human, this

module has been mounted in a place that minimizes human access.

Summary of Contents for A1SD Series















































































































































Search results

Summary of Contents for A1SD Series

Reviews:

Related manuals for A1SD Series

Brands by name

Popular brands

Sindoh A1SD Series, User Manual

Search results

Summary of Contents for A1SD Series

Reviews:

Related manuals for A1SD Series

Brands by name

Popular brands