Sinclair GSH-100ERA series, Operational Manual

Page: 6 / 64

AIR-TO-WATER HEAT PUMP INSTALLATION MANUAL
★ Before cleaning please cut
off the power supply.
Otherwise, it may cause electric
shock or damage.
★ The power supply must
adopt special circuit with
leakage switch and enough
capacity.
★ User can not change
power cord socket without
prior consent. Wiring
working must be done by
professionals. Ensure good
earthing and don't change
earthing mode of unit.
★
Earthing: the unit must be
earthed reliably !
The earthing wire should
connect with special device
of buildings.
If not, please ask the qualified
personnel to install.
Furthermore, don't connect
earth wire to gas pipe, water
pipe, drainage pipe or any
other improper places which
professional does not
recognize.
★
Never insert any foreign
matter into uint to avoid
damage . And never insert
your hands into the air
outlet of outdoor unit.
★
Don't attempt to repair
the unit by yourself.
Improper repair may cause
electric shock or fire, so you
should contact the service
center to repair.
★
Don't step on the top of
the unit or place anything
on it.
There is the danger of fall of
things or people.
★
Never block the air
inlet and outlet of unit.
It may reduce efficiency or cause
stop of the unit and even fire.
★
Keep pressurized
spray, gas holder and
so on away from the unit
above 1m .
It may cause fire or explosion.
4