Sinclair GSH-100ERA series, Operational Manual

Page: 5 / 64

AIR-TO-WATER HEAT PUMP INSTALLATION MANUAL
2. Safety Considerations
Please read the following contents carefully before operating.
WARNING
★
Once abnormality like
burning smell occurs, please
cut off the power supply
immediately and then contact
with service center.
If the abnormality still exists, the
unit may be damaged and
electric shock or fire may
result.
★
Don't operate the unit
with wet hand.
Otherwise,
it may cause electric shock.
★
Before installation,
please see if the voltage
of local place accords
with that on nameplate
of unit and capacity of
power supply, power
cord or socket is
suitable for input power
of this unit.
★
Special circuit must be
adopted for power supply to
prevent fire.
Do not use octopus
multipurpose plug or mobile
terminal board for wire
connection.
★
Be sure to pull out the
power plug and drain the
indoor unit and water tank
when unit is not in use for a
long time.
Otherwise, the accumulated
dust may cause overheating,
fire or freeze of water tank or
coaxial heater exchanger in
winter.
★
Never damage the
electric wire or use the
one which is not
specified.
Otherwise, it may cause
overheating or fire.
3