
Simrad PI32
44
857-164636 / Rev.A
Position display
The
Position display
provided by the PI32 offers all key
information related to safe navigation on one display
presentation. Note that the information provided by the
Position
display
assumes that you have the relevant sensors (GSP and
temperature feeler) connected to your PI32 system.
The following information is
provided by the position
display:
Water temperature:
The
temperature will only be
available if the applicable
temperature feeler is connected
to the PI32.
Two individual distance logs:
Both distance logs can be reset
using the setup parameters.
Current geographical
position:
If the position fails to
be updated, the characters will
flash.
Current speed, course and depth:
This information will only
be available if the applicable sensors have been connected to the
PI32.
Local time and date
Status:
This is the current status of the satellite reception. The
character “A” means that the reception is good, “B” means that
the reception is acceptable, and “C” means that it is poor. If
there is no reception, the message
No valid POS
will be shown.
To change presentation parameters
The presentation is controlled by the parameters defined in the
PI32 setup. To change these parameters, press the
ENT
button
to open the
Reset log
page.
Related topics
→
Reset log setup, page 173