References
179
857-164636 / Rev.A
Sensor setup
These parameters are used to establish communication between
the PI32 and the sensors.
To access the parameters, press the
MENU
button to open the
main menu, Then select
Sensor setup
on the
Setup
menu.
Note:
In order to set up these parameters correctly, you need to know
what kind of sensors you have, how often the provide
information updates, and on which channels they communicate.
A form has been provided in the front of this book to write down
this information.
For each of the sensors, enable it, and select sensor type,
communication rate and communication channel.
Note:
The settings you choose for update rate and communication
channel must be identical to the settings in the relevant sensor. If
these settings are not matched, your PI32 will not be able to
read the information from the sensor!
Related topics
→
How to set up the sensors, page 48