Simrad ES70 - DOWNLOAD AND INSTALLATION REV B, Operator'S Manual

Page: 19 / 128

Installation
Note
If you replace your computer, or if you replace major components inside your computer,
you will need a new license code.
We strongly advice you to record the license code for safe keeping. You may for example
write it down in the beginning of this manual.
1 Double-click the ES70 icon on the desktop to start the application.
2 Click the
Setup
icon under the
Main
menu to open the
Setup
menu.
→ Setup menu on page 106
3 Click
Installation
to open the
Installation
sub-menu.
On the sub-menu, click
Software License
to open the
Software License
dialog.
4 Write down the
Hardware ID
provided by the
Software License
dialog.
5 Contact your dealer to order the software license.
Your dealer will need the following information from you to place the order:
• Vessel name and call sign
• Vessel type (trawler, purse seiner, etc.)
• Vessel owner’s name, address and contact information
• Serial number on all transceivers
• Hardware ID
6 When the software license is returned to you, start the ES70, open the
Software
License
dialog, and click
Enter Licence String
.
7 Write down the code, and click
Ok
.
8 Click
OK
to save the current settings and close the dialog.
Initial start-up procedure
This procedure explains how to set up you computer to communicate with the transceiver.
You only need to do this once.
Note that this procedure cover both the Windows XP and Windows 7 operating systems.
1
On the computer, define the network adapter settings
343539/B
17