User Manual
// Simpro MegaDumper®
Original Instructions // English // v86.0 // February 2022 // Page
12
2.2.3.2
Removing bins
Open the door and, using the grab-handles provided, remove the bin from the cradle. Some
bins may need to be lifted or tilted slightly to disengage the combing from the lifting teeth.
Type-M and Type-N Cradles
2.2.4.1
Emplacing bins
Open the door and place the bin onto the cradle,
central and firm against the cradle backplate.
If using a forklift or powered pallet truck to load the
bin, reduce speed to avoid heavy impacts which
might damage the cradle.
Once the bin is correctly emplaced, close the door.
Most common 610L bulk bins have a
1000x1200mm oblong plan view. These bins
must be loaded in the correct orientation,
with the longer 1200mm faces at front and
rear, and the 1000mm faces at the sides.
Bulk bins are held in place when inverted by
‘l
catches
’ h f h c l
These catches
should be positioned to hold the top edges of the bin,
with a maximum free travel of 25mm (1 inch). The
catches can be unbolted and repositioned to allow emptying bins of different sizes.
It is recommended to use a forklift or powered pallet truck when moving bulk bins.
2.2.4.2
Removing bins
Open the door and remove the bin from the cradle.
Type-X (Custom) Cradle
The exact procedure for emplacing bins into a custom
cradle may vary. Contact your Simpro agent for advice or
training if required.
2.2.5.1
Emplacing bins
Open the door and place the bin, drum, or container onto
the cradle, positioned centrally against the backplate.
If using a forklift or powered pallet truck to load the
bin, reduce speed to avoid heavy impacts which
might damage the cradle.
Once the bin is correctly emplaced, close the door.
2.2.5.2
Removing bins
Open the door and remove the bin, drum, or
container from the cradle.
