background image

18

10. l

imiTEd

 W

arranTy

Always keep your receipt as proof of purchase.

We’re here to help! If you have any questions or comments, call our toll-free hotline 1-866-4SIMONIZ (1-866-474-6664). Have your 

serial number ready. The serial number can be found on the back plate, located on the side of the unit. 

This product has a Parts Replacement, Product Exchange and/or Repair Warranty only. 

NO REFUNDS

 will be provided. Please see stores 

for Product Exchange details. 

One (1) Year Warranty

This product is guaranteed to be free from defects in material and workmanship for 

one (1) year

 from the date of its original purchase. 

This product is not guaranteed against wear or breakage due to misuse and/or abuse.

You may purchase accessories directly through place of purchase, or by calling our toll-free hotline: 1-866-4SIMONIZ (1-866-474-6664).

This warranty does not cover accidental damage, unreasonable use, normal wear and tear, use of improper detergents, freezing, 

neglect, or non-compliance with the Operating Instructions. The warranty does not cover loss of use or other consequential damages 
arising from any of the above, nor does it cover repairs made or attempted by unauthorized persons. 

The warranty is void if the equipment is used for commercial, rental or industrial purposes. 

If you have further questions, please visit our website (www.simoniz.ca) or call 1-866-4SIMONIZ (1-866-474-6664).

Made in China

Imported for

Trileaf Distribution Trifeuil, Toronto, Canada M4S 2B8

039-6506-2 ENGLISH 

WM01

Warranty

Summary of Contents for 039-6506-2



















Reviews: