background image

10

3. S

coPE

 

of

 d

ElivEry

3.1 Unpacking

  WARNING

 

If any parts are damaged or missing, please call the SIMONIZ® toll-free service number at 

1-866-4SIMONIZ

 (1-866-474-6664). 

Please do NOT bring the unit back to the store until you have called this number.

 

If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible 
serious personal injury.

 

Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or 
modification is deemed misuse and could result in a hazardous condition leading to possible serious personal injury.

 

Do not connect this tool to the power supply until assembly is complete. Failure to comply could result in accidental starting 
and possible serious personal injury.

 

Carefully remove the power tool and any accessories from the carrying bag (A). Make sure that all items listed in the packaging 
contents are included.

 

Inspect the tool carefully to make sure no breakage or damage occured during shipping.

 

Do not discard the packaging material until you have carefully inspected and satisfactorily operated the tool.

Packaging materials raw materials and can be re-used. Separate different packaging materials and take them to a 
designated waste disposal facility. More information can be obtained from the appropriate authorities, service centre, 
or Canadian Tire®.

Old power tools do not belong in your household garbage! Dispose of old power tools appropriately! We are all responsible 
for the environment. The local authorities can inform you of collection locations and working hours.

Scope of Delivery

Summary of Contents for 039-6506-2



















Reviews: