16
7. c
lEaning
and
m
ainTEnancE
DANGER
•
Before any adjustment, maintenance or cleaning, make
sure to:
- Unplug the power tool from the electrical outlet.
- Let it come to a full stop before placing it on the back.
•
Do not expose the power tool to humidity or extreme
temperatures.
7.1 Cleaning
CAUTION
•
Never use flammable or combustible solvents around
the tool.
•
Never immerse the tool in water or other liquids.
•
Never let water or other liquids reach the inside of the
tool during cleaning.
•
Remove all detachable parts from the tool.
PARTS
HOW TO CLEAN...
Waxing pads /
Polishing pads
•
Soak in a warm solution of water and
mild soap for about 10 minutes.
•
Rinse with clean water and let it dry
well.
Tool Casing
•
Clear dust and debris off all ventilation
slots.
•
Keep the tool handles clean, dry and
free of oil or grease.
•
Use a damp cloth and mild soap only
to clean the tool casing, as certain
cleaning agents and solvents (e.g.
gasoline, turpentine, lacquer thinner,
paint thinner, chlorinated cleaning
solvents, ammonia and household
detergents containing ammonia, etc)
are harmful to plastic and insulated
parts.
7.2 Lubrication
•
Self-lubricating bearings are used in this tool so periodic
re-lubrication is not required. However, it is recommended
that once a year, you have this tool thoroughly cleaned and
inspected by an authorized technician. For details, please call
the SIMONIZ® toll-free service number at 1-866-4SIMONIZ
( 1-866-474-6664).
7.3 Storage
•
Always ensure to remove the wax pads or polishing pads
from the rotary discs when the tool is not in use. This will
allow the rotary discs to dry and retain its original shape.
•
To prolong the foam pads’ life and shape, ensure to store the
power tool with the pads facing up.
8. T
Echnical
S
PEcificaTionS
Rated speed:
3,200 RMP (no load)
Weight:
5 lb 4 oz (2.28 kg)
Rated capacity:
10” (25.4 cm)
Protection class:
II
AC input voltage:
120V, 60Hz 0.65 A
•
The level of sound felt by the user could exceed 85dB (A) and
ear protection measures must be taken.
•
The declared vibration total value has been measured in
accordance with a standard test method and may be used
for comparing one tool with another.
•
The declared vibration total value may also be used in a
preliminary assessment of exposure.
WARNING
•
The vibration emission during actual use of the power
tool can differ from the declared total value depending
on the situation in which the tool is used.
•
Wear appropriate hearing protection taking into
consideration an estimation of exposure in the actual
conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
trigger time).
Cleaning and Maintenance / Technical Specifications
