Appendix
BA_EA-KL²-DF(-K)_EN_13
www.simon-protec.com
Date: 20.08.2019
Issue: 1.3 / 08.2019
Page 16
5. Appendix
5.1. Care and Maintenance
See supplementary sheet “Safety instructions and warranty
conditions!
5.2. General business and delivery terms
Deliveries
and services
are
subject
to
the
currently
applica-
ble terms for products and services of the electrical industry
(green delivery terms), including the supplementary clause
“Extended retention of title”. These are published by the
German Electrical and Electronic Manufacturers‘ Association
(ZV EI), Frankfurt. If you are not aware of these, we will gladly
send them to you. You can also download these agreements
from
.
The place of jurisdiction is Passau.
5.3. Company addresses
5.3.1. System manufacturer
SIMON PROtec Systems GmbH
Medienstraße 8
94036 Passau
Tel.: +49 (0) 851 988 70 - 0
Fax: +49 (0) 851 988 70 - 70
E-Mail: [email protected]
Internet: www.simon-protec.com
5.3.2. Germany
SIMON PROtec Deutschland GmbH
Medienstraße 8
94036 Passau
Tel.: +49 (0) 851 379 368 - 0
Fax: +49 (0) 851 379 368 - 70
SIMON PROtec Deutschland GmbH
Fraunhoferstraße 14
82152 Planegg-Martinsried
Tel.: +49 (0) 89 791 70 11
Fax: +49 (0) 89 791 79 72
E-Mail: [email protected]
Internet: www.simon-protec.de
5.3.3. Switzerland
SIMON PROtec Systems AG
Allmendstrasse 38
8320 Fehraltorf
Tel.: +41 (0) 44 956 50 30
Fax: +41 (0) 44 956 50 40
E-Mail: [email protected]
Internet: www.simon-protec.ch
5.3.4. Hungary
SIMON PROtec Systems Kft.
Sodras utca 1. fszt. 1
1026 Budapest
Tel.: +36 (0) 30 552 0424
E-Mail: [email protected]
Internet: www.simon-protec.hu
6. Manufacturer‘s declaration
We hereby declare that the product complies with
the applicable directives. The declaration of con-
formity can be read at the company‘s premises
and will be sent to you upon request.
This declaration certifies
that the product complies with the mentioned directives, but
does not represent any guarantee of the product‘s features.
This declaration loses its validity, if the product is modified
without seeking our prior authorisation.
7. EC manufacturer‘s declaration
(distributor)
The installer is responsible for the proper assembly or com-
missioning, the preparation of the declaration of conformity in
accordance with EU directives and for affixing the CE mark
-
ing. The CE marking must be affixed visibly!
