4
ht5000HB - pro5dl
CAUTiON
To reduce the risk of electrocution, disconnect the power supply cable on the rear panel before removing the top cover of the projector.
For technical service refer to trained personnel authorised by the manufacturer.
Read all chapters of this manual carefully before switching on the projector. This manual provides basic instructions for using the hT5000hB
- PRO5DL system. installation, preliminary adjustments and procedures that necessitate the removal of the top cover and contact with
electrical components must be performed by authorised, trained technicians. To ensure safe operation and long term reliability use only
the power cables supplied by the manufacturer. Observe all warnings and precautions.
This symbols warns of the risk of electrical
shocks caused by non-insulated voltage
inside the product.
2 SAfETY wARNiNgS
This symbol indicates important instruc-
tions on the use and maintenance of
the product.
LAMP wARNiNg
If the lamp suddenly explodes with a loud bang, air the room thoroughly before using it.
Do not attempt to replace the bulb: contact your local service centre for the replacement.
ENViRONMENTAL iNfORMATiON
This product contains materials derived from natural resources during its manufacture. It may contain materials which
constitute a health and environmental hazard. To prevent harmful materials from being released into the environment and
to promote the use of natural materials, SIM2 Multimedia provides the following information regarding the disposal and re-
cycling of the product. Waste electrical and electronic materials (WEE) should never be disposed of in normal urban waste
disposal facilities. The label on the product, shown here, indicating a cancelled garbage can, is intended to remind you
that the product requires special handling at the end of its service life.
Materials such as glass, plastic and some chemical compounds are recoverable and can be recycled for reuse. Please
observe the following instructions:
1. when you no longer wish to use your electrical and electronic equipment, take it to your local waste disposal facility
for recycling.
2. You may return your old equipment to your dealer free of charge when you buy a new product which is equivalent
or has the same functions as the old one. Call SiM2 Multimedia to find your local dealer.
3. if you need more information regarding recycling, reuse and product exchanges, please contact customer service
at the number given in the manual.
Lastly we suggest further measures to safeguard the environment, such as recycling of internal and external packaging
(including that used for shipping) in which the product was delivered. With your help, we can reduce the amount of envi-
ronmental resources required to make electric and electronic equipment, reduce the use of waste tips for used equipment
and, in general, improve our quality of life by making sure that hazardous materials are correctly scrapped.
Incorrect treatment of the product at the end of its service life and failure to follows the above disposal instructions are
punishable under local legislation.