background image

6

GB

Specification

   

 

 
 Voltage: ........................................................................................230V~ 50Hz

 

 

 Power: .................................................................................................. 2400W
  No load speed:................................................................................6000min-1
  Disc diameter: ...................................................................................Ø230mm
  Disc bore size: .....................................................................................Ø22mm
  Maximum humidity: ..................................................................... 90% at 25°C
  Operating temperature: ............................................................-15°C - +40°C
  Maximum operating height: ....................................... 1000m (above sea level)
  Soft start: .................................................................................................... Yes
  Spindle thread: ..........................................................................................M14
  Ingress protection: .....................................................................................IP20
  Protection class: .........................................................................................
 Weight: ....................................................................................................4.3kg

As part of our ongoing product development, specifications of Silverline products 

may alter without notice.

Sound and vibration information:

  Sound pressure LPA: ........................................................................ 91.3dB(A)
  Sound power LWA: ......................................................................... 102.3dB(A)
  Uncertainty K: ............................................................................................ 3dB
  Weighted vibration ah: .................................................................... 5.122m/s2
  Uncertainty K: ...................................................................................... 1.5m/s²
The sound intensity level for the operator may exceed 85dB(A) and sound protection 

measures are necessary.

Original Instructions

Technical Abbreviations Key

Introduction

Thank you for purchasing this Silverline tool. This manual contains information necessary 
for safe and effective operation of this product. This product has unique features and, 
even if you are familiar with similar products, it is necessary to read this manual carefully 
to ensure you fully understand the instructions. Ensure all users of the tool read and fully 
understand this manual.

Wear hearing protection  
Wear eye protection 
Wear breathing protection 
Wear head protection

Wear hand protection

Wear protective clothing

Read instruction manual

Toxic fumes or gases!

Caution!

Always disconnect from the power supply when adjusting, changing 
accessories, cleaning, carrying out maintenance and when not in use!

Be aware of kickback!

Keep bystanders away!

DO NOT use for side grinding.

Beware of flying objects

Class II construction (double insulated for additional protection) 

Environmental Protection   
Waste electrical products should not be disposed of with household waste. 
Please recycle where facilities exist. Check with your local authority or 
retailer for recycling advice.

Conforms to relevant legislation and safety standards.

 

Description of Symbols 

The rating plate on your tool may show symbols. These represent important information 
about the product or instructions on its use. 

V

Volts

~, AC

Alternating current

A, mA

Ampere, milli-Amp

n0

No load speed

n

Rated speed

°

Degrees

Ø

Diameter

Hz

Hertz

, DC

Direct current

W, kW

Watt, kilowatt

/min or min

-1

Operations per minute

rpm

Revolutions per minute

dB(A)

Decibel sound level (A weighted)

m/s

2

Metres per second squared (vibration magnitude)

951855_Z1MANPRO1.indd   6

09/11/2016   09:59

Summary of Contents for 951855






















Reviews: