![background image](http://html1.mh-extra.com/html/silverline/660471/660471_instructions-manual_1273581008.webp)
8
GB
Problem
Possible cause
Solution
Tool will not operate
No supply of power
Check that power is available at source
Brushes worn or sticking
Have carbon brushes replaced by an authorised Silverline service centre
Switch is faulty
Have the tool repaired by an authorised Silverline service centre
Motor components faulty or short circuited
Have the tool repaired by an authorised Silverline service centre
Tool runs or cuts slowly
Blunt or damaged cutter
Resharpen or replace cutter
Speed Control Dial (7) set low
Increase variable speed setting
Motor is overloaded
Reduce pushing force on tool
Makes an unusual sound
Mechanical obstruction
Have the tool serviced by an authorised Silverline service centre
Armature has shorted sections
Have the tool serviced by an authorised Silverline service centre
Excessive vibration
Incorrectly fitted or loose accessory
Refit or tighten accessory
Bent or damaged accessory
Replace accessory
Heavy sparking occurs inside
Motor Housing (12)
Brushes not moving freely
Have carbon brushes checked and replaced by an authorised Silverline
service centre
Armature short circuited or open circuited
Have the tool serviced by an authorised Silverline service centre
Commutator dirty
Have the tool serviced by an authorised Silverline service centre
Troubleshooting
Disposal
Always adhere to national regulations when disposing of power tools that are no
longer functional and are not viable for repair.
• Do not dispose of power tools, or other waste electrical and electronic
equipment (WEEE), with household waste
• Contact your local waste disposal authority for information on the correct way
to dispose of power tools
660471_Z1MANPRO1.indd 8
23/11/2015 11:22