GB
4
Technical Abbreviations Key
Specification
n0
No load speed
n
Rated speed
opm
Orbits or oscillations per minute
psi
Pounds per square inch
cfm
Cubic feet per minute
°
Degrees
Ø
Diameter
/min or min
-1
Operations per minute
rpm
Revolutions per minute
BSP
British Standard Pipe (thread)
dB(A)
Decibel sound level (A weighted)
m/s
2
Metres per second squared (vibration
magnitude)
Original Instructions
Specification
Working pressure ........................................90psi
Air consumption..........................................2CFM
Air inlet ........................................................¼" BSP
No load speed .............................................54,000rpm
Weight .........................................................0.70kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measure are necessary.
WARNING:
Always wear ear protection where the sound level exceeds 85dB(A) and limit the time
of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop using the
tool immediately and check the ear protection is correctly fitted and provides the correct level of
sound attenuation for the level of sound produced by your tool.
WARNING:
User exposure to tool vibration can result in loss of sense of touch, numbness, tingling
and reduced ability to grip. Long-term exposure can lead to a chronic condition. If necessary, limit
the length of time exposed to vibration and use anti-vibration gloves. Do not operate the tool with
hands below a normal comfortable temperature, as vibration will have a greater effect. Use the
figures provided in the specification relating to vibration to calculate the duration and frequency
of operating the tool.
Sound and vibration levels in the specification are determined according to international standards.
The figures represent normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of noise and vibration.
www.osha.europa.eu
provides information on sound and vibration levels in the workplace that
may be useful to domestic users who use tools for long periods of time.
Carefully read and understand this manual and any label attached to the tool before use. Keep these
instructions with the product for future reference. Ensure all persons who use this product are fully
acquainted with this manual.
Even when used as prescribed it is not possible to eliminate all residual risk factors. Use with
caution. If you are at all unsure of the correct and safe manner in which to use this tool, do not
attempt to use it.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction manual.
Conforms to relevant legislation and safety standards
Environmental Protection
Air tools should not be disposed of with household waste. They contain traces of
oil and other lubricants. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice
Introduction
Thank you for purchasing this Silverline tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and, even if
you are familiar with similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions. Ensure all users of the tool read and fully understand
this manual.
633630_MANUAL.indd 4
31/05/2017 08:38
Summary of Contents for 633630
Page 2: ...2 Fig A Fig B 3 1 2 3 4 5 6 7 8 633630_MANUAL indd 2 31 05 2017 08 38...
Page 7: ...Air Micro Grinder Kit 633630 7 silverlinetools com 633630_MANUAL indd 7 31 05 2017 08 38...
Page 25: ...Mini amoladora neum tica 633630 25 silverlinetools com 633630_MANUAL indd 25 31 05 2017 08 38...
Page 37: ...Stift freesmachine 633630 37 silverlinetools com 633630_MANUAL indd 37 31 05 2017 08 38...