4
GB
WARNING:
Always wear ear protection where the sound level exceeds
85dB(A) and limit the time of exposure if necessary. If sound levels are
uncomfortable, even with ear protection, stop using the tool immediately
and check the ear protection is correctly fitted and provides the correct level
of sound attenuation for the level of sound produced by your tool.
WARNING:
User exposure to tool vibration can result in loss of sense of
touch, numbness, tingling and reduced ability to grip. Long term exposure
can lead to a chronic condition. If necessary, limit the length of time
exposed to vibration and use anti-vibration gloves. Do not operate the tool
with hands below a normal comfortable temperature, as vibration will have
a greater effect. Use the figures provided in the specification relating to
vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according
to EN60745 or similar international standards. The figures represent
normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool may produce increased levels of
noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users
who use tools for long periods of time.
Carefully read and understand this manual and any label attached to
the tool before use. Keep these instructions with the product for future
reference. Ensure all persons who use this product are fully acquainted
with this manual.
Even when used as prescribed it is not possible to eliminate all residual risk
factors. Use with caution. If you are at all unsure of the correct and safe
manner in which to use this tool, do not attempt to use it.
Specification
Drill:
Technology ................................................. 14.4V, Ni-Cad
No load speed ............................................ 0 – 550min
-1
Chuck capacity........................................... 10mm (
3
⁄
8
"
)
Weight ........................................................ 1.5kg
Drilling Capacities:
Mild steel ................................................... 8mm
Wood .......................................................... 20mm
Battery:
Cell type ..................................................... Ni-Cad
Voltage ....................................................... 14.4V (12x 1.2V), DC
Capacity ..................................................... 1.2Ah
Charger:
Input power ................................................ 220 – 240V~, 50Hz
Output power........................................ ...... 18V, DC, 400mA
Cable length ............................................... 2m
Protection class ..........................................
Sound Level Information:
Sound pressure L
PA
..................................... 65.5dB(A)
Sound power L
WA
........................................ 76.5dB(A)
Uncertainty: ................................................ 3dB
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Class II construction (double insulated for additional protection)
Caution!
DO NOT incinerate batteries!
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice
Batteries containing cadmium must not be disposed of with
household waste. Contact your local waste disposal authority
for information on the correct way to dispose of batteries
containing cadmium.
c
d
236447_Z1MANPRO1.indd 4
30/08/2013 15:51
