■
8
│
GB
SSW 400 A1
Fitting/removing the attachments
WARNING! RISK OF INJURY!
►
Do not insert the plug into the mains power socket until the appliance is
fully assembled.
►
Take great care when handling the attachments
-
! They are
very sharp!
1) To fit an attachment
-
onto the drive shaft
, push the shaft of
the attachment
-
onto the drive shaft
on the blender foot
.
The two bulges on the drive shaft
should grip into the recesses on the
shaft of the attachment
-
:
2) Then push the attachment firmly onto the drive shaft
so that the attachment
-
until you hear and feel it click into place.
NOTE
►
The beating disc
-
is fitted onto the shaft at an angle. This is not a manu-
facturing error, but designed to whip air into liquids.
Summary of Contents for SSW 400 A1
Page 3: ... 3 A B C ...
