Silvercrest SHFD 1350 A1, Operation And Safety Notes

Page: 11 / 128

9 GB
m
WARNING! Risk of
electric shock!
Do not
immerse the product in water or
other liquids. Do not hold the
product under running water.
m
WARNING! Risk of
electric shock!
Never use a
damaged product. Disconnect
the product from the power
supply and consult your retailer
if the product is damaged.
m
WARNING! Risk of
electric shock!
Do not set up
the product next to a sink or in
moist areas.
Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product’s rating label.
Connect the product only to an
earthed socket-outlet. Always
make sure that the plug is
inserted into the wall socket
properly.
To avoid damaging the power
cord, do not squeeze, bend or
chafe it on sharp edges. Keep
it away from hot surfaces and
open flames as well.
Lay out the power cord in such
a way that no unintentional
pulling or tripping over is
possible.
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
Pull the plug and not the cable
itself to disconnect the product
from the power supply.
Do not wrap the power cord
around the product. Connect
the product to an easily
reachable electrical outlet so
that in case of an emergency
the product can be unplugged
immediately.