■
18
│
GB
│
IE
│
NI
│
CY
SEM 1100 D3
NOTE
►
The two espresso sieves
o p
, the measuring spoon
a
and the
drip tray
q
are dishwasher-safe .
Cleaning the appliance
Clean the appliance with a moist cloth . If necessary, use a little detergent on the cloth .
Ensure that the appliance is completely dry before the next use .
Descaling the appliance
CAUTION! PROPERTY DAMAGE!
►
Do not generate steam when the descaler solution is in the water tank
9
!
The machine has a descaling reminder function: after approx . 500 brewing
operations, the three control lamps
5 t z
all flash rapidly 5 times at the same
time to remind you that the machine needs to be descaled . If you do not descale
the appliance immediately, the control lamps
5 t z
will start flashing again
the next time you switch the appliance on . If you still have not descaled the appli-
ance after switching it on for the third time, the reminder function stops .
Proceed as follows to use the descaler
s
supplied with the appliance:
1) Add the descaler
s
(125 ml) to the water tank
9
.
2) Fill the water tank
9
up to the Max mark with water and replace the tank
in the appliance .
3) Switch on the appliance using the On/Off switch
1
. Make sure the steam
control
7
is shut off .
4) Insert the sieve holder
i
without
any espresso sieve
o p
into the appliance .
5) Place 2 cups or a container capable of holding at least 250 ml under the
sieve holder openings .
6) As soon as the “Espresso” control lamp
t
lights up continuously, press the
“Espresso” button
3
.
Allow around 250 ml (around 2 cups) of descaler solution to run through
and then stop the process by pressing the “Espresso” button
3
again .
Carefully pour out the used descaler solution .
7) Allow the descaler
s
to act for approx . 1 minute .
8) Repeat steps 6 to 7 three more times . Empty the water tank
9
completely
the last time .
9) Place a sufficiently large container (at least 1 litre) under the sieve holder
openings .
10) Rinse out the water tank
9
with fresh water and fill it with fresh water up to
the Max mark .