GB
│
IE
│
NI
│
CY
│
17
■
SEM 1100 D3
6) Wipe the nozzle under the casing with a damp cloth . If necessary, add a little
mild detergent onto the cloth . After cleaning with detergent, always wipe off
with a cloth moistened with clean water . Ensure that there is no detergent
residue left on the nozzle .
7) Push the casing back onto the nozzle (Figure 3) .
LOCK
LOCK
Figure 3
Cleaning the hot water shower
Clean the hot water shower
r
after each use:
1) After you have prepared the espresso/cappuccino and removed the sieve
holder
i
, wipe the entire surface of the hot water shower
r
with a mois-
tened cloth to remove all powder residues .
2) Replace the sieve holder
i
without
the espresso filters
o p
.
3) Place an empty cup under the portafilter
i
and press the “Espresso” button
3
. Water flows out of the hot water shower
r
rinsing out the remaining
powder residue .
4) After about 20 seconds, press the “Espresso” button
3
again and
switch the appliance off with the On/Off switch
1
.
5) Remove the sieve holder
i
again .
Cleaning the accessories
1) Clean the sieve holder
i
, the two espresso sieves
o p
, water tank
9
, the
measuring spoon
a
and the drip grille
q
in warm water .
NOTE
►
If you put detergent into the water, it may effect the taste of the espresso .
If the stains can only be removed with detergent, always rinse the items
afterwards with lots of clean water .
2) Dry all parts well .
