Operation
10
To Fill The Flush Tank:
1. Remove the cap (top left hand side of
2. the Flush Tank)
3. Place hose in the tank opening
4. Fill the tank with water (70L)
5. Replace the cap after filling the tank.
To Flush The System:
1. After Spaying, Disengage the PTO.
2. Turn the ball valve from the
“Main
Tank”
(12 o’clock) to the
“Flush Tank”
(6 o’clock) position
3. Turn the unit back on to flush the system
(With the
Section Valves
turned
ON
).
To Clean The Filter:
1. Disengage the PTO
2. Turn the ball valve to the
“Off”
position (3 o’clock)
3. Unscrew the Filter Nut &
Remove the Filter Bowl
4. Clean the Filter
5. Secure the filter &
Filter Bowl in position
To Drain The Main Tank:
1. Disengage the PTO
2. Turn the ball valve to the
“Off”
position
(3 o’clock)
3. Unscrew the Filter Nut & Remove the
Filter Bowl
4. Turn the ball valve to the
“Main Tank”
position to drain the main tank
To Drain The Flush Tank:
1. Disengage the PTO
2. Walk around to the right hand side of the
machine
3. Remove the end cap
4. Allow water to drain
5. Secure the cap back into place.
OPTIONAL FLUSH TANK
