Silicon Graphics Reality Center, Installation Manual

Page: 77 / 117

Random Access Adjustment Mode
10-4 R5976280 RC3300W 19072001
Factory Preset Frequencies
The table below lists the 16 fixed factory preset frequencies available. Another 8 blocks are custom programmable.
To select a desired cross hatch frequency, handle as follow :
1 Push the cursor keys é or ê to highlight the desired cross hatch frequency (menu 1).
2 Push the cursor keys ç or è to scroll to another page.
3 Press ENTER if the desired block is selected.
kHz/Hz
15.6/50 PAL/SECAM
15.7/60 NTSC
31.2/50 EDTV
31.5/60 IDTV
33.7/60 HDTV HIVISION
61.0/76 VGA 1,2
35.5/87 VGA 4
48.0/60 1024 x 768
44.2/70 Super VGA 2
61.0/76 Super VGA 3
63.9/60 1280 x 1024
72.1/67 Super VGA 4
75.0/60 1600 x 1200
77.5/96 1024 x 768
89.3/67 1600 x 1280
105.0/96 1280 x 1024
INTERNAL # PATTERN
kHz / Hz
15.6/50 PAL/SECAM
15.7/60 NTSC
31.2/50 EDTV
31.5/60 IDTV
33.7/60 HDTV HIVISION
31.5/70 VGA 1,2
Select with é or ê
scroll with ç or è
<ENTER> to accept
<EXIT> to return
menu 1
Random access adjustment mode selection menu.
What is possible ?
This is the main menu for the Random Access adjustment mode.
Through this menu, the following adjustments and features are accessible :
- Picture Tuning
Sync slow/fast(only for RGB inputs)
Color Balance
Peaking
Clamp Tuning
Port 2 : Video/S-Video
Contrast Modulation
Line Multiplier
- Geometry
- Convergence
- Focussing
- Color select
- Orbiting
- Soft Edge
Select with é or ê
then <ENTER>
<EXIT> to return.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
SOFT EDGE
menu 1