Silicon Graphics Reality Center, Installation Manual

Page: 25 / 117

Mechanical Set Up
5-1 R5976280 RC3300W 19072001
5
WALL DISPLAY ASSEMBLY
Bottom Cabinet
Removing the Panels
Both side panels and the front panel should be removed before assembling the system.
Handle as follow :
1. Loosen both fixing screws A a quarter of a turn by turning counter clockwise
(image 1).
2. Slide off the front cover by pushing first a little bit downwards.
3. Push a flat screwdriver on the indicated place (black arrow on image 1).
4. Pull to the outside until the upper side of panel becones free from the projector
chassis (click system).
5. Pull the panel backwards to free the panel completely from the chassis (two
pins on the bottom side of the panel are inserted into the chassis).
6. Repeat step 4 & 5 for the other side.
$
image 1
Lining up the Bottom Cabinets
To line up the bottom cabinets :
1. Place the cabinet with the front side on a straight line.
2. The distance between two cabinets should be 430 mm (image 1, top view).
3. Waterlevel the projector cabinet in both directions by turning the feet in or out (image 2).
4. Check if the top of all projector cabinets are on the same height.
image 1
image 2