Silicon Graphics Reality Center, Installation Manual

Page: 76 / 117

Random Access Adjustment Mode
10-3 R5976280 RC3300W 19072001
Selecting Setup Pattern
Set up of the Selected Setup Pattern ?
If an external source is connected to the projector, menu 1 will be displayed.
To select the desired setup pattern, handle as follow :
1 Push the cursor keys é or ê to highlight the desired setup pattern
2 Press ENTER to select.
Choose a setup pattern
from below :
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL # PATTERN
Source 01
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Genlocked pattern : internally generated cross hatch pattern, locked on the external source.
Internal # pattern : internally generated cross hatch pattern and locked on internal generated sync signals. (No external source
necessary)
If no external source is connected to the projector, the internal cross hatch pattern menu will be displayed.
Note:
The menus in this manual are created for an external source, connected to one of the inputs, and the 'Genlocked Pattern' is selected.
Internal Cross Hatch Pattern
When using the Internal Cross Hatch Pattern ?
The Internal # pattern menu will be displayed if the internal cross hatch pattern has been selected or if no source is connected to
the projector.
SOFT EDGE
SEMU ON/OFF
GEOMETRY
GAMMA
ADJUSTMENT
Image 4
LEFT START
LEFT LENGTH
RIGHT START
RIGHT LENGTH