manualshive.com logo in svg

Silicon Graphics Reality Center, Installation Manual

Share
Download
Silicon Graphics Reality Center Installation Manual Download Page 69

Configurations

8-32

R5976280 RC3300W  19072001

The following extra equipment is necessary to set up this configuration :

All these peripherals are mounted in a RACK, and delivered as one unit.  The order numbers and quantities are only given as information

for after sales orders.

MAGIC interface

2x

R9828121 (230V) or R9828128 (120V) according to the ordered destination kit.

RCVDS05

2x

R9828700 (230V) or R9828709 (120V) according to the ordered destination kit.

Quad Splitter

2x

R9828300 (230V) or R9828309 (120V) according to the ordered destination kit.

Quad  Switcher

1x

R9828311 (230V) or R9828319 (120V) according to the ordered destination kit.

VSE40

1x

R9828520 (230V) or R9828529 (120V) according to the ordered destination kit.

Hint

As there is no power switch on the system, use socket strips with power breaker to connect the projectors, audio amplifier and the

RACK to the wall outlet.

Internal Connections RACK system 2-channel sytem

See 'Internal Connections RACK system 2-channel sytem' under paragraph '2-channel configuration mono with switching option'.

Connection table internal connections RACK system

See 'Connection table internal connections RACK system' under paragraph '2-channel configuration mono with switching option'.

Summary of Contents for Reality Center






















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands