manualshive.com logo in svg

Silicon Graphics Reality Center, Installation Manual

Share
Download
Silicon Graphics Reality Center Installation Manual Download Page 27

Mechanical Set Up

5-3

R5976280 RC3300W  19072001

Mirror Cabinet

Attention

All screws and fixation plates are mounted on the mirror cabinet.

Fixation Plate Mirror

Before mounting the mirror fixation plate, remove first the both screws and fixing part.  Handle as follow (image 1) :

1. Turn out both screws.

2. Take away the fixing plate.

3. Position the mirror fixation plate.

4. Reinsert both fixing screws with the fixing plate between the screws and the cabinet.

image 1

Fixing the Hook profiles

To mount the hook profiles, handle as follow :

1. Place the hook profile to the left side of the mirror cabinet.

2. Secure with 5 screws.

Mounting the Mirror

To mount the mirror, handle as follow (image 1) :

1. Turn out first the screws of the fixing plates (3 places).

2. Put the mirror on its place.

3. Mount the fixing plates by turning in the screws.

image 1

image 1

Summary of Contents for Reality Center






















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands