Silicon Graphics Reality Center, Installation Manual

Page: 103 / 117

Random Access Adjustment Mode
10-30 R5976280 RC3300W 19072001
9DOXH
3RVLWLRQ
6WDUWDQJOH
image 1
4 Select e.g. 'Red low' by pushing the control disc forward or backward (menu 3).
5 Press ENTER to select. The 'Soft Edge gamma Correction selection' menu will be displayed (menu 4).
6 Select a position on the gamma curve or a value or the start angle of the gamma curve (image 1).
7 Press ENTER to adjust (menu 5)
8 Change the position or the value by scrolling up or down with the control disc.
9 When set, press ENTER again to return to the selection menu and repeat the step 4 till 8.
10 When finished, press EXIT to return to the 'Soft Edge Gamma Expert' menu.
11 If necessary, repeat the above procedure for the other adjustments.
menu 3
Select with é or ê
then <ENTER>
<EXIT> to return.
SOFT EDGE
GAMMA EXPERT
RED LOW RED HIGH
GREEN LOW GREEN HIGH
BLUE LOW BLUE HIGH
FACTORY PRESET
Warning : these adjustments should
be performed only by qualified
personnel !
menu 4
Select with arrow keys
then <ENTER>
<EXIT> to return.
SOFT EDGE
GAMMA CORRECTION
position value
20 80
position value
40 156
position value
60 210
position value
80 245
start angle 220
menu 5
Select with arrow keys
then <ENTER>
<EXIT> to return.
SOFT EDGE
GAMMA CORRECTION
position value
20 80
position value
40 156
position value
60 210
position value
80 245
start angle 220