Silex technology MNS-300EM, Command Manual

Page: 43 / 134

4. Station Commands
31
Sets the MAC address to be used for the static MAC address mode.
SET NW BRCLADDR <MAC address>
When the static MAC address mode is on, the specified address is used as the MAC address
for the wireless LAN interface. The value is ignored when the auto mode is on.
For <MAC address>, enter the address in the form of aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff .
The factory default value is
00-00-00-00-00-00
.
SH NW BRCLADDR can show the MAC address in use for the static MAC address mode.
4-4-4. SET NW BRCLADDR
4-4-3. SET NW BRACCess
Accepts/Denies an access to the configuration function of MNS-300EM via a wired LAN
port, when the bridge mode is on.
SET NW BRACC [ ENable | DISable ]
ENable
: Accepts an access to the configuration function.
A client device connected to the wired LAN port of MNS-300EM can access the
configuration function including the Web interface.
DISable
: Denies an access to the configuration function.
The factory default value is
ENable
.