7. Server Commands
65
Shows the network statistics for the server.
SH SERVEr CO
Sample output:
Local > SH SERVEr CO
Seconds Since Zeroed:
28 Frames Sent, 1 Collision:
N/A
Bytes Received:
0 Frames Sent, 2+ Collision:
N/A
Bytes Sent:
0 Send Failures:
0
Frames Received:
0 Send Failure Reasons:
N/A
Frames Sent:
0 Receive Failures:
0
Multicast Bytes Rcv'd:
N/A Receive Failure Reasons:
N/A
Multicast Bytes Sent:
N/A Unrecognized Destination:
N/A
Multicast Frames Rcv'd:
N/A Data Overrun:
N/A
Multicast Frames Sent:
N/A User Buffer Unavailable:
N/A
Frames Sent, Deferred:
N/A System Buffer Unavailable:
N/A
Unsupported parameters show N/A.
Sets the server description string.
SET SERVEr DEScription <description-string>
Enter the description for <description-string>.
The factory default value is
Silex MNS-300EM
.
7-3. SH SERVEr CO
7-4. SET SERVEr DEScription
Summary of Contents for MNS-300EM
