![Silex technology MNS-300EM Command Manual Download Page 34](http://html1.mh-extra.com/html/silex-technology/mns-300em/mns-300em_command-manual_1271326034.webp)
22
MNS-300EM Command Manual
This is a test command to force the version 0 protocol to be used for the PEAP authentication.
SET NW PEAPV0 [ENable | DISable]
Enable/Disable mandatory use of the version 0 protocol.
ENable
: Enables mandatory use of the version 0 protocol.
DISable
: Disables mandatory use of the version 0 protocol.
This command can be enabled when the wireless LAN authentication method is PEAP, and
is implemented for protocol tests. Usually,
DISable
is selected for a normal operation.
The factory default value is
DISable
.
SH NW PEAPV0
can show the current setting
4-2-12. SET NW PEAPV0
Changes the password of private key file to be registered to MNS-300EM.
SET NW PKPASS <passphrase>
For <passphrase>, enter a string with 8-63 alphanumeric characters.
The value has to be set before the key file is registered, otherwise the file cannot be
decoded properly.
The factory default value is a NULL string.
Example:
Local> SET NW PKPASS keypassword
4-2-13. SET NW PKPASS
Summary of Contents for MNS-300EM
