Silex technology MNS-300EM, Command Manual

Page: 62 / 134

50
MNS-300EM Command Manual
The following examples of command execution use S1 as a serial port. When S2 is enabled
as a data port, S2 can be used instead. When there are the commands which cannot be
used for that port, such note is described.
6-1. Serial Port Commands
6-1-1. SH PORT
Shows the serial port setting.
SH PORT
Sample output:
Local> SH PORT
Port Q-Size Type Attributes
*S1 0 serial 115200 N 8 1 XON/XOFF RS232
6-1-2. SET PORT S1 CHarsize
Changes the character size of the serial port.
SET PORT S1 CHarsize [7 | 8]
Enter 7 or 8 as the character size. The factory default value is
8
.