Silca Unocode 399 Plus, Operating Manual

Page: 41 / 98

Operating manual - English Unocode 399 PLUS
Copyright Silca 2010 37
Step 3
• Insert the de pth symbol ( number or letter).
Press ENTER.
• Enter the d epth measurement associated to
the symbol. Press ENTER.
Repeat the operation to the last depth.
All measurements are expressed in hundredths
of millimetres or inches, according to the setting
in machine Options (chap.5.9, page 52)
When the o peration i s finished, p ress F 1 to
continue.
Fig. 30
Step 4
• Enter the figure for the cutting space from the key stop to the centre of the first cut and press ENTER.
• Enter the figure for flare related to the set cut and press ENTER.
• Enter the figure for the cutting space from the centre of the first cut to the centre of the second cut
and press ENTER.
• Enter the figure for flare related to the set cut and press ENTER.
• Repeat the operation to the last cut.
When the operation is complete, press F1 to save and
continue. The display will show:
• Press ENTER to save the data.
• Press STOP t o go back t o the previou s m enu
without saving the data.
F2
F1
number of
depths
symbols associated
with depths
depths entered
cutting angle
cutting spaces
flare (base of the cut)
cutting
depths
HEAD stop
TIP stop