Optika
Operating manual - English
Copyright Silca 2017
29
10) Remove the key, fit the new key to be compared; press ENTER, the display will show:
Fig. 35
11) make sure the key is properly aligned (the top yellow bar must be just a vertical line).
12) Confirm with ENTER, a few seconds later the display will show:
13) Make sure the left-hand yellow bar should point upwards as much as possible. If not, follow the
instructions in ch.6.1.
14) Confirm with ENTER, a few seconds later the display will show the matching result (Examples):
L:2707
L:2419
left-hand bar (profile luminosity)
left-hand bar (profile luminosity)
